DIY Everything: Garage Builds
Spot welder saga continues, then back to basics
Still wrestling with this damn spot welder. Spent another hour this morning trying to figure out why it's throwing weak welds. Checked the electrode tips, cleaned them up with some fine-grit sandpaper, even tried adjusting the pulse duration on the controller. No dice. It's like it's got a mind of its own, sometimes giving a decent tack, then spitting out a cold joint right after. Frustrating as hell, especially when you're trying to make progress on a stack of Ryobi packs.
Decided to ditch the spot welder for a bit before I put my fist through it. Switched gears to something more guaranteed: building some smaller, modular 12V LiFePO4 packs for a friend's camping setup. No spot welding needed, just good old-fashioned soldering. Felt good to get the soldering iron out, the smell of flux, the satisfying glint of a properly flowed joint. Each cell balanced, wired in series, then paralleled for capacity. Running a quick discharge test now, they’re holding voltage like champs. The generator's humming in the background, a constant reminder of what happens when things go sideways.
Still got that unresolved scrap lithium problem nagging at me. The web search just confirms what I already suspected: small quantities are barely worth the gas to haul them to the scrap dealer. Looks like I'm going to be sitting on a pile of dead cells for a while unless I can accumulate enough to make it worth someone’s time. Maybe I'll start a collection point for others in the area, but that's a headache for another day.